Affordable Garage Doors
3/10 John Duncan Court
Varsity Lakes QLD 4227
Phone: (07) 5593 7228

Garage Door Remotes

C945 Merlin Bear Claw Remote

Merlin Three Channel Mini Remote

Merlin 3 channel mini remote 433.92Mhz AM

Compatible with the following Garage Door Motor Models:

  • Rollerace MR60
  • MR600, MR600A, MR650
  • MR800, MR800A, MR850
  • MR1000
  • MT5580, MT5580P
  • MT60, MT60P
  • MT230
  • MT600, MT800, MT1000
  • MT3850
  • MJ3800
  • M3800R
  • MGA600
  • MGL300, MGL400
  • MGS500, MGS500T
  • MGS1000, MGS1000T
  • ML500, ML700
  • MLR750, MLR850
  • HE60, HE60R

Features:

  • Merlin's unique Bear Claw design in a Black case with 3x Green buttons
  • Transmitter Frequency 433MHz
  • Key ring size  

Comment:

A compact three button key ring transmitter, featuring the 3 channel “bear claw” mini-remote (AM)
 

  •     Trasmitter: AM Trasmission
  •     Rolling code
  •     New code every use
  •     over 100 billion code to choose from
  •     Power supply: 10A20 (3) battery
  •     Batteries and Instructions Included


Suits Models:
MR600 MR650 MR800 MR850 MT5580 MT60 MT600 MT1000

Controls up to three different doors or gates. Suitable for pocket, or key chain.

 

PROGRAMMING INSTRUCTIONS:
MERLIN +2.0 E945M GARAGE DOOR REMOTE OPENER
1. Identify your Garage Door unit.
2. Remove the light cover to reveal the receiver board.
3. Locate the Orange or Purple ‘Learn’ or ‘LRN’ button.
4. On your new remote press & hold the button that you wish to program to the door.
Continue to hold the button through step 5.
5. While still holding the button on your remote press & release the ‘Learn’ / ‘LRN’ button on the receiver board.
6. Release the button on your remote.
7. If successful, the motor light will flash to indicate the remote has been programmed.
8. Test the new remote to check programming has been successful.

author: Affordable Garage Doors Gold Coast

M128Wall switch. Two buttons for multi use. Wall mountable.

Comes with coding instructions or see Merlin website for help Suits later model 430R & 230T

Suits Models:
MR60, MR600, MR600A, MR650, MR800,
MR800A, MR850, MR1000, MT5580, MT5580P,
MT60, MT60P, MT600, MT800, MT1000, MT230,
MT3850, MJ3800, MJ3800R, MGA600, MGL300,
MGL400, MGS500, MGS500T, MGS1000, MGS1000T,
ML500, ML700, ML500, MLR750, MLR850, HE60, HE60R

Programming Remotes: Locate the learn button on the opener. Press the learn button for 1-2 seconds (Until the light begins to flash.) Press and release the big button on the wall button then press and release the same button again. The light will stop flashing. Your wall button is now coded in.

 

author: Affordable Garage Doors Gold Coast
CM844

Suits Garage Door Openers manufactured between 2001-2009.

4 channel keyring remote 433.92Mhz AM

  • compatible with
  • MR600
  • MR800
  • MT5580
  • MT60
  • MT600
  • MT1000

PROGRAMMING INSTRUCTIONS:
M-844 keyring 4-button remote control
(to open up to four doors or gates)
• Uses high security code hopping technology.
• Only suits openers from 1999 if they are fitted with Merlin’s code hopping receiver.
• Incompatible with all earlier models, unless add-on rolling code receiver and adapter loom is fitted.
• Replaces remotes with the same colour buttons.
• Suits gate openers fitted with Merlin M-530 or M-532 code hopping receiver cards.
To fit or replace the batteries, use a coin to unscrew the cover on the rear of the remote. Insert the batteries with their writing facing up towards you.
To program this remote into the memory of your opener, locate the 'learn' button on the opener or receiver. Press the 'learn' button for more than one second then press the required button on the remote for one second. Press the remote button again to confirm. On the next press of that button, the door opener should operate. Repeat the process if required.

To reduce risk of personal injury by the door or gate:
1. Only wall-mount the remote control above 1.5 m from the floor.
2. Only wall-mount the remote control in sight of the door or gate.
3. Supervise every operation of the door or gate.
4. Do not allow children to play with the door or gate controls.
To reduce risk of unauthorised access to your home or garage remove the remote control from your car when the car is unattended.
To attach to a wall or other flat surface use any suitable flat head screw through the hole in the wall mounting plate. The rear of the remote control clips into the wall mounting plate.

author: Affordable Garage Doors Gold Coast
M842 FM

M842 FM

Merlin Green M842 Garage Remote

Compatible with the following Garage Remotes:

  • See photo attached to match your remote for compatibility
  • Not compatible with Merlin Bear Claw style remotes
  • Not compatible with Merlin Blue range remotes

Compatible with the following Garage Door Motor Models:

  • Merlin 230T
  • MR430R
  • 430R
  • MO34 (Upgrade Pack)

Features:

  • Slimline Black circular case with 2 Green buttons
  • Shock/Splash resistant Ultrasonically welded case
  • Uses code hopping technology, selecting a random code from 4.3 billion possible combinations every time used
  • Transmitter Frequency 433MHz
  • Key ring size      

Comment:

Keyring. One large button for primary use - small second button for secondary use.

Wall mounting bracket for key storage or wireless push button. Comes with coding instructions or see Merlin website for help Suits later model 430R & 230T

Programming Remotes: Locate the learn button on the opener. Press the learn button for 1-2 seconds (Until the light begins to flash.) Press and release the big button on the remote then press and release the small button on the remote. The light will stop flashing. Your remote is now coded in. The big button will operate the door, the small button will operate the light.

 

 

author: Affordable Garage Doors Gold Coast

M844Keyring. Four buttons for multi use. Wall mouting bracket for key storage or wireless push button.

Comes with coding instructions or see Merlin website for help

The M844 remote is compatible with the following garage sectional or roller doors:

Merlin PRO-LIFT 430R
Merlin 230T
Gate Motors:
Merlin G950
Merlin G915
Merlin G715
Merlin G740A

author: Affordable Garage Doors Gold Coast

M832Standard size/visor clip remote control. One large button for primary use - small second button for secondary use

Can also be affixed to an interior wall to be used as wireless push button and removed from holster.

Comes with coding instructions or see Merlin website for help Suits later modem 430R & 230T

 

The M832 remote is compatible with the following garage sectional or roller doors:

Merlin PRO-LIFT 430R
Merlin 230T
Gate Motors:
Merlin G950
Merlin G915
Merlin G715
Merlin G740A

author: Affordable Garage Doors Gold Coast

M834Standard size/visor clip remote control. Four buttons for multi use.

Can also be affixed to an interior wall to be used as wireless push button and removed from holster.

Comes with coding instructions or see Merlin website for help Suits later model 430R & 230T

The M834 remote is compatible with the following garage sectional or roller doors:
Merlin PRO-LIFT 430R
Merlin 230T
Gate Motors:
Merlin G950
Merlin G915
Merlin G715
Merlin G740A

author: Affordable Garage Doors Gold Coast

M802Two buttons for multi use Visor clip/wall mountable This remote control has superseded the 2100 and M800 models.

Compatibility:
M230T (Prolift)
M430R (Prolift)
M802 (Blue Remote)
Please Note: Not compatible with Green Merlin Remotes or Merlin+ or Merlin+ 2.0 models or motors post July 2001

Comes with coding instructions, coding is by 12 numbered dip switches and can be easily copied from your existing remote control.

Programming Remotes: Locate the code switches on the motor (usually hidden by a small black plastic access panel.) Remove the visor clip and battery cover from the new remote control. Locate the code switches in the new remote control. Match the code switches in the new remote control to the code switches in the opener. (DO NOT CHANGE THE CODE SWITCHES IN THE OPENER). Alternatively, if you have an existing remote control, you can match the code switches in the new remote control to the code switches in your existing remote control.

 

PROGRAMMING INSTRUCTIONS:
M802 Instructions
1. Unscrew the small screw at the back of the new remote and remove the small tab from the battery.
2. Open your original remote (if you do not have one, please remove the tab at the back of your motor which is labelled ‘code dip switches’ or remove the light cover of the motor to find the switches.
3. Change the switches of the new remote to match either your old remote or your motor.
4. Close the remote and test.

author: Affordable Garage Doors Gold Coast

M800Order M800 for compatible remote control.

Compatibility:
M230T (Prolift)
M430R (Prolift)
M800 (Blue Remote)
Please Note: Not compatible with Green Merlin Remotes or Merlin+ or Merlin+ 2.0 models or motors post July 2001

Features:
Dimensions: 3.5cm x 6.5cm x 1.5cm
Battery: 23A 12V
LED Indicator
Slim Design
Compact Pocket Size
Controls up to 1 door

 PROGRAMMING INSTRUCTIONS:
M800 Instructions
1. Unscrew the small screw at the back of the new remote and remove the small tab from the battery.
2. Open your original remote (if you do not have one, please remove the tab at the back of your motor which is labelled ‘code dip switches’ or remove the light cover of the motor to find the switches.
3. Change the switches of the new remote to match either your old remote or your motor.
4. Close the remote and test.

author: Affordable Garage Doors Gold Coast

M802Order M802 for compatible remote control

Programming Remotes:

Locate the code switches on the motor (usually hidden by a small black plastic access panel.) Remove the visor clip and battery cover from the new remote control. Locate the code switches in the new remote control. Match the code switches in the new remote control to the code switches in the opener. (DO NOT CHANGE THE CODE SWITCHES IN THE OPENER).
Alternatively, if you have an existing remote control, you can match the code switches in the new remote control to the code switches in your existing remote control.

 

PROGRAMMING INSTRUCTIONS:
M802 Instructions
1. Unscrew the small screw at the back of the new remote and remove the small tab from the battery.
2. Open your original remote (if you do not have one, please remove the tab at the back of your motor which is labelled ‘code dip switches’ or remove the light cover of the motor to find the switches.
3. Change the switches of the new remote to match either your old remote or your motor.
4. Close the remote and test.

author: Affordable Garage Doors Gold Coast

Cm842Merlin CM842


2 channel keyring remote 433.92Mhz AM -

compatible with MR600/MR800 and MT5580/MT60/MT600/MT1000

2 channel keyring remote 433.92Mhz AM

- compatible with MR600/MR800 and MT5580/MT60/MT600/MT1000

 

PROGRAMMING INSTRUCTIONS:
M-842 keyring 2-button remote control
(to open up to two doors or gates)
• Uses high security code hopping technology.
• Only suits openers from 1999 if they are fitted with Merlin’s code hopping receiver.
• Incompatible with all earlier models, unless add-on rolling code receiver and adapter loom is fitted.
• Replaces remotes with the same colour buttons.
• Suits gate openers fitted with Merlin M-530 or M-532 code hopping receiver cards.
To fit or replace the batteries, use a coin to unscrew the cover on the rear of the remote. Insert the batteries with their writing facing up towards you.
To program this remote into the memory of your opener, locate the 'learn' button on the opener or receiver. Press the 'learn' button for more than one second then press the required button on the remote for one second. Press the remote button again to confirm. On the next press of that button, the door opener should operate. Repeat the process if required. To attach to a wall or other flat surface use any suitable flat head screw through the hole in the wall mounting plate. The rear of the remote control clips into the wall mounting plate.

author: Affordable Garage Doors Gold Coast

Merlin Whisper Drive

Merlin Whisper Drive

Merlin Silent Drive

Merlin Silent Drive